Christmas Gnomes for Festive Decorating!

Posted by admin on

Make these DIY Christmas gnomes using simple supplies from the craft store! These are perfect for decorating a mantel or table for the holidays. This is a great project for both kids and adults.

Skills Required: Beginner. Even if you’ve never crafted before, you can easily make a gnome using a paper cone. You’ll be doing some cutting (using templates), painting, and attaching things using adhesive.

Cute Christmas Gnomes

I acknowledge that things have gotten a little out of hand here with the homemade gnomes. I’ve loved making them for every holiday! Just like my felt ball garlands.

So far I’ve made fall gnomes, Thanksgiving gnomes, Valentine’s Day gnomes, St. Patrick’s Day gnomes – and done some gnome ornaments too.

The thing is, they’re just so dang easy to make! If you’re in need of some quick Christmas decorations, these guys can be made in a jiffy. They look great on a Christmas mantel and kids love them. They might even give them names!

This is Larry and his brother Darryl (what show is that from, minus a Darryl?).

They’re made using paper mache cones, flannel fabric, faux fur, and a few other basics. Once you get the idea, you’ll want to make them for every holiday. And then you’ll have the same problem as me.

A straight up gnome addiction! But how can it be wrong when it feels so right?

DIY Christmas gnomes

Making Gnome Christmas Decor

You can make a Larry or Darryl in six simple steps! You’re going to make the template, then set aside and paint the cone. You’ll cut out the hat fabric. Then you’ll attach the fabric, then the beard, and then the nose.

Most of the steps go relatively quick, which is why you’ll want to make them for every holiday. Before we get into that, I’ve got a few frequently asked questions for you. If you want the FAQs check them out, otherwise the tutorial is at the bottom.

What do gnomes represent?

Why gnomes? They symbolize protection, good luck, longevity, hard work, mischief, and playfulness (source). All those things sound cool to me! Usually you see them in the garden, but I decided to bring them indoors.

Cones to Use

The paper mache cones for my base can be found here. They are 10.63 x 4″. The template I made works for this size cone, but I’m sure you can alter it easily for other sizes.

I prefer the look of the paper mache, but you can also use foam cones. To be honest, they are a little bit cheaper and more readily available. I’m just a paper mache girl for whatever reason (and you can stack them).

Material for Beards

I used faux fur for the beards, though some people use felt, yarn, or even a cut up dollar store mop head. There are a few options – I do like the faux fur best, plus it comes in a bunch of different colors.

How to Attach Fabric

Spray adhesive works well to attach the fabric, but you could probably use a thin layer of Mod Podge. If you use anything liquid, just be careful that your hat fabric isn’t too thin (I used flannel). Otherwise, the glue could seep through and make dark spots unevenly.

Are you ready to learn how to make these Christmas gnomes? Here we go!

Gather These Supplies

  • Paper mache cones – 2
  • Cone template
  • Beard template
  • Wood beads – 2 (5/8″)
  • Acrylic paint – skin tone of your choice
  • Flannel fabric – enough to cover the cone
  • Faux fur pieces
  • Paper to print template
  • Paintbrushes
  • Spray adhesive
  • Sharpie or pen
  • Painter’s tape
  • Sandpaper
  • Scissors
  • Hot glue gun

Cut Out the Hat Fabric

You’ll first want to create a template you’ll use to cut the hat fabric, and you’ll want to hold onto this template. You can use it anytime you want to make additional gnomes! Remember mine fits the 10.63 x 4″ cones.

Print it out (poster setting, full size, it should take four pieces of paper). You’ll then cut it out on the outside red line and piece together with tape.

Save the scraps from cutting it out – don’t crumple the paper. You’ll see why.

Paper template and a hand holding a paper cone

Before you go any further, test the template for fit! You don’t want to move onto the next step if it doesn’t cover the cone.

Wrapping the paper template around the cone

Now here’s why you need the scraps. If you think about your gnome, the fabric isn’t going to cover the entire hat. There will be a portion at the bottom that is painted “skin tone” and beard.

The large scrap piece that you cut off the bottom at the widest part of the curve? You’re going to use it to draw a line about 1 3/4″ from the bottom of your template! Turns out the cut scrap makes a perfect curved line for you to trace.

Trimming the base of the template using the excess paper

Now cut the bottom portion off your template on the line you just traced using the scissors.

Cutting the paper template with scissors

Do another test fit on your cone, just to be sure. Set the template aside for the moment.

Wrapping the trimmed paper template around the paper mache cone

Paint the Cone

Choose your skin tone paint color. You can go with any flesh tone you like, and paint the nose too.

Hand holding light skin colored paint and a paintbrush

Paint the entire bottom third of the cone with a few coats of paint and let dry.

Painting a paper mache cone with light skin tone craft paint

Set the cone aside so you can make some fall gnome hats.

Cut Out the Hat Fabric

Place your fabric down on a cutting surface and place the template on top.


I used a cutting wheel to just zip around the template. You can use a craft knife, or trace the template and cut with scissors. It was easy to grabbing the cutting wheel so I did.

Trimming out plaid fabric using a cutting wheel

Here’s the hat fabric, ready to go on!

Cut piece of plaid fabric on a work surface

Attach the Hat Fabric

The skin tone paint needs to be completely dry for the next step. Cover the bottom portion of the cone with painter’s tape. The reason for this is so that you don’t spray the “skin” with spray adhesive. You want it on the cone only.

Hand wrapping painter's tape around the base of a paper mache cone

Cover with painter’s tape, overlapping as shown. I suppose you could also spray the fabric piece, but I didn’t really have anywhere to place the fabric down and spray down onto it. So this was easier for me!

The next step is to spray the cone, quickly apply the fabric, and wrap around to secure.

Note: use spray adhesive in a well ventilated area and check safety information if you are sensitive (you might want to use a mask).

Applying plaid fabric to the cone using spray adhesive

Smooth down the hat and let dry.

Attach the Beard

Gather your beard making supplies, including the template.

Tracing a beard template on the back of gray faux fur fabric

Trace the template on the back of the faux fur (color of your choice). Then you’re going to cut out.

NOTE: Don’t just cut through the faux fur because you’ll end up cutting off a lot of the beard fur. Pull the fur forward and away from the back of the fabric when cutting.

Piece of gray faux fur beard cut out

Place a bead of hot glue on the back of the beard piece, then press down onto the cone.

Gluing a gray beard to a Christmas gnome

Add the Nose

Use 5/8″ wood beads. It’s easy to sand a small portion of the bead flat with a piece of sandpaper, so it can sit flush when you glue it.

Hand holding a wood bead with one side sanded

The last step is to attach the nose with a dab of hot glue. Put it right in the center where the hat meets the beard.

Gluing the wood nose to the front of the Christmas gnome

Make as many gnome as you like! Pick fun fabrics, and even add fun embellishments if you like. Here’s how mine turned out.

Learn how to make Christmas gnomes

Display these bad boys anywhere you like. I love my gnomies!

Yield: 2 gnomes

Christmas Gnomes

Learn how to make Christmas gnomes

Learn how to make gnome Christmas decor in a few easy step! This is perfect for your holiday decorating.

Prep Time 30 minutes
Active Time 1 hour 30 minutes
Total Time 2 hours
Difficulty Easy
Estimated Cost $15


  • Paper mache cones - 2
  • Cone template
  • Beard template
  • Wood beads - 2
  • Acrylic paint - skin tone of your choice
  • Flannel fabric - enough to cover the cone
  • Faux fur pieces
  • Paper to print template
  • Spray adhesive
  • Painter's tape


  • Paintbrushes
  • Sharpie or pen
  • Sandpaper
  • Scissors
  • Hot glue gun


  1. Print out the template and assemble using tape. Cut out, and then cut 1 3/4" off of the bottom of the template. Set aside.
  2. Paint the bottom of the cone with a few coats of acrylic paint, using the skin tone of your choice. Let dry.
  3. Cut the fabric of the hat out using the template.
  4. Tape off the bottom of the cone, and apply spray adhesive to the top portion. Wrap the fabric around, smooth, and let dry.
  5. Cut the faux fur for beards using the template. Trace on the back and then keep the faux fur forward while cutting.
  6. Attach a beard piece to the base of the cone using a hot glue gun.
  7. Sand a flat spot on a wood bead using sandpaper. Hot glue the nose in the center where the beard meets the fabric to finish.

Did you make this project?

Please leave a rating or share a photo on Pinterest!

© Amy Anderson
Category: Christmas Crafts

I hope you enjoyed this gnome Christmas decor! If you love them, let me know in the comments. Then check out these other posts:

The post Christmas Gnomes for Festive Decorating! appeared first on DIY Candy.